THE PROCESS OF TECHNOLOGY FORMING IN VOLUME AREAS OF OUTER CLOTHING DETAILS USING A DEVICE FOR VACUUMING A CLOSED TECHNOLOGICAL SPACE
Keywords:
vacuum space, molding, aerodynamics, bursting load, perforation, air flow, deformation, low-operation technology, shellAbstract
This article provides a detailed analysis of the processes of wet heat treatment in the manufacture of the upper range, describes the principle of operation of a special vacuum forming device and detailed characteristics of various degrees of vacuum. as well as the theoretical foundations of the aerodynamic passage of air in a vacuum mode during shaping and the results of studies of several types of suit fabric for breaking load, the corresponding results correspond to the above studies. The substantiation of the sizes of perforations is carried out depending on the limiting state of the deformable tissue, characterized by the breaking load.
References
S.Sh. Tashpulatov. Development of high-efficiency resource-saving technology for the manufacture of garments: Abstract of doctoral thesis... Doctor of Technical Sciences. - Tashkent: TITLP. 2008.-page 38 .
D.A. Bahriddinova, S.Sh. Tashpulatov, E.S. Alimbayev, D.A. Ismailova. Changing the geometric parameters of textile materials for WTO parts of clothing // Problems of Textiles. - Tashkent, 2011. № 1. - – pages. 63-66.
Patent UZ № FAP 00918. Device for forming the volume parts of clothes / D.A. Bahriddinova, S.Sh. Tashpulatov, A.D. Dzhuraev, T.D. Kadirov, S.Z. Yunusov, A. Toshev, N.M. Articbaeva, B.A. Rikhsieva // Rasmiy ahborotnoma. - – 2012 - № 6
B.M. Yavorsky, A.A. Detlaf. Handbook of Physics. - Moscow: Nauka, 1971. – page 940 .
V.A. Kostyukov. Fundamentals of Hydraulics and Aerodynamics. - Moscow: The Higher School, 1975. - – page 220.
D.A. Bakhriddinova, I. G. Shin, S.Sh. Tashpulatov, I. V. Cherunova, M. K. Candidate Formation of flat-volume sections of clothing using a special device for evacuating a closed technological space // Izvestiya VUZov. - Russia, 2019 No. 6 –С191-202. (Scopus).
